Motor Not Included
|
 $32.95 Flex Drum Sander This soft drum sander will help you attain the soft contours on your Intarsia projects. This specially designed unit clamps to your 2000 (or 1725) R.PM motor. Designed to fit 5/8" shaft it also comes with a reducer bushing to fit 1/2" motor shafts. The flex sander is approximately 2 1/2" in diameter x 7" in length. Just push the pad and sleeve onto the arbor and it stays put on it’s own (there are two abrasive strips on the arbor to help). You can sand past the ends without the fear of marking the work piece, and even use the end to put a ?dish? shape in the part if you need to. DS-1 Flex Sander, comes complete with 80 and 120 grit sleeves with pad.
| Grit Sleeve with Pad |
Grit Sleeve with Pad |
Adapter Shaft |
| NDS-80 $4.95 |
NDS-120 $4.95 |
DS-AS $2.00 |
| NDS-100 $4.95 |
NDS-220 $4.95 |
|
|
 |
$21.95 Set Intarsia Detail Sanders Invented by an Intarsia enthusiast in Florida, just for Intarsia projects. You will find these sanders hard to replace, and use them every step of the way on your Intarsia projects, from start to finish. The bow sander works great for those ?hard to get to? areas, and the flexible flat sander is great for contour sanding. These sanders do not require special sandpaper, and use your favorite grit cloth backed sanding sheets, cut into strips. The bow sander will also hold abrasive cord. The set comes with some pre-cut strips of sandpaper to help get you started. $21.95 for set. |
 |
$10.00 per roll. Sanding Rolls for Detail Sander 1" x 10 Yard Roll of Cloth Backed Sandpaper For Detail Sanders above.
| IS-G 150 Grit $10.00 |
IS-G 180 Grit $10.00 |
|
 |
$3.50 ea.Abrasive Cleaning Stick This stick is great for giving your sanders extra life. The stick is 1” square X 6” long. The new abrasive cleaning stick is $3.50 ea. |
 |
$229.00 Luxo Magnifier-Light Luxo is the ?top of the heap? of magnifiers. The magnifer is 3 diopter, and has a ground glass lense. This is a very high quality light not to be confused with the cheap stuff. The same light we use in our classroom. Comes with a clamp that will mount the unit to a table top, bench, etc. Can also be removed from the clamp and inserted into a drilled hole. Additional shipping charges will apply due to the weight of the light. |
 |
$24.95 Foot Switch Comes pre-wired with a 6’cord. just plug the switch in your outlet and then plug your saw in the back of the foot switch cord, no special wiring needed. |
 |
$36.95 Hot Glue Gun This Hot Glue Gun heats to 400 degrees and has a whopping 225 watts of power. We also have the glue for this gun in 10” sticks. The high heat softens the glue very well and when we press the part to the backing, the glue flattens out very thin. We use a combination of yellow woodworking glue and the hot glue works like a clamp to hold the part in place until the woodworking glue has time to set up. We use very small dots of the hot melt glue. The glue gun is $36.95 ea. and the glue sticks are $6.50 per pound and sold only in one pound bags. |
|
Hot Glue $6.50 Glue sticks are $6.50 per pound and sold only in one pound bags. |
 |
$12.00 Old Masters Finish Gel Finish We use three coats of this gel on our projects which produces a very nice finish without the need for a matte finish for the third coat
Intarsia Whiting, is another gel finish we use when trying to “keep white wood white”. This whiting is the same basic formula as the regular clear, with a white pigment added. When you want to keep it white, just use this whiting for the first coat, the same as you would the clear.
Shipping Old Masters is only available to those living in the contiguous United States.
If ordering only one can of gel it will come U.S. Mail with a $6.00 shpg. charge, two or more it will be shipped via UPS so please send $9.00 shpg.
| OM Clear Gel $12.00 |
OMW White Gel $12.00 |
|
 |
$32.95 Wonder Wheel The Wonder Wheel can be used to add texture to all Intarsia projects, it works best on soft wood (like Western Red Cedar). The wheel also makes dowels used for eyes nice and dark. The wonder wheel is 6" in diameter x 1/2" wide with a 1" mounting hole , and comes with a reducer bushing to fit a 1/2" shaft on your bench or pedestal grinder. Max R.P.M. is 4,500 and works perfect from 3,000 to 4,000 R.P.M.
Click Here for more information about the How to Use the Wonder Wheel |
 |
$14.95 Coarse Wheel Dresser This works great to "dress" the Wonder Wheel. If you plan to use your Wonder Wheel to add texture to your intarasia projects it works best if the wheel is dressed to a "V" point. When it arrvives from the factory it has a flat edge. We were using a piece of coarse sandpaper stapled to a flat board. This diamond wheel dresser does the job much quicker and will last much longer.
$14.95 Fine Wheel Dresser Same as above with a finer grit. This will put a nice clean point for making that extra fine texture. |
 |
$189.00 Foredom Variable Speed Bench Lathe Comes with one #A-CHA-5, 1/4?collet holder (with collet), one #TM-3 left hand, and one #TM-4 right hand tapered spindles. To run two Kirjes sanders (as pictured above) you will need to purchase an additional collet listed below. We recommend mounting the #140 on the right and the #120 on the left of the bench lathe, as pictured above. The Kirges #130 will not fit on the lathe. Additional shipping charges will apply due to the weight. |
|
$20.00 Foredom Bench Lathe Extra Collet |
 |
Kirges Sanders are Soft Inflatable Sanders, the air is pumped in through the stem. They work great on the Foredom Variable Speed Bench Lathe above. The KS-130 Does not fit on the Foredom Lathe.
| MODEL # |
SIZE |
SHAFT SIZE |
PRICE |
| K-120 |
20 X 25 MM, 3/4" X 1" |
1/4" |
$25.00 ea.  |
| K-130 |
28 X 80 MM, 1 1/8" X 3 3/16 |
5/16" |
$40.00 ea. |
| K-140 |
42 X 44 MM, 1 5/8" X 1 3/4" |
1/4" |
$29.95 ea. |
| KHP |
Kirjes Hand Pump |
N/A |
$10.00 ea. |
|