Judy's Closet

Authentic Judy Gale Roberts Intarsia Projects.
These are pieces that I made during classes to demonstrate the techniques that I use.
Each project is unique, having different grains and colors. Some are more finished
than others. The pieces pictured below are the actual intarsia project you will receive.
Please note shipping charges are not included in the price. Shipping charges will vary depending on the size of the piece and where you are located.
Phone 1.800.316.9010 Email: judy@intarsia.com Fax 1.865.428.7870

Finished Beginner Duck
is approximately 8" high by 16" wide.

$200.00 JCD1
Finished SparPei
is approximately 10" high by 9" wide. This was from the 2006 Intermediate class.

$250.00 JCS1

Finished Elephant Head
is approximately 14" high by 16" wide. This was the project from the 2005 Intermediate class.

$350.00 JCE

SOLD
Finished Bear Head
is approximately 13" high by 10" wide. This was from the 2004 Intermediate class.

$300.00 JCB

SOLD
Finished Beginner Duck
is approximately 8" high by 16" wide.

$200.00 JCD2

SOLD
Finished Little Dog in a Shoe
is approximately 11" high by 14" wide. This was from the 2003 Intermediate class.

$300.00 JCLD1

SOLD

Finished Cat in Bag
is approximately 20" high by 10" wide. This was from the 2007 Intermediate class.

$300.00 JCCB1

Finished Cat in Ba
is approximately 20" high by 10" wide. This was from the 2007 Intermediate class.

$300.00 JCCB2
Finished Little Dog in a Shoe
is approximately 11" high by 14" wide. This was from the 2003 Intermediate class.

$250.00 JCLD2

SOLD
Finished SparPei
is approximately 10" high by 9" wide. This was from the 2006 Intermediate class.

$250.00 JCS2
Finished Beginner Duck
is approximately 8" high by 16" wide.

$200.00 JCD3

SOLD
Finished Beginner Duck
is approximately 8" high by 16" wide.

$200.00 JCD4

Elephant Head
is approximately 14" high by 16" wide. This was the project from the 2005 Intermediate class. This project is not glued down and needs to have the finish applied. Project includes unfinished roughed in pieces with the backer board.

$250.00 JCE9

SOLD

CT-2 Lion
This was for the Advanced class in 2006. It is approximately 14" high by 10" wide. This project is not glued down and needs to have the finish applied. Project includes unfinished roughed in pieces with backer board and instrutions. The nose and some of the mane has one coat of Old Master Gel.

$300.00 JCCT210

Corgi
This was for the Intermediate II class in 2009. It is approximately 13 3/4" high by 10" wide. This project is not glued down and needs to have the finish applied. Project includes unfinished roughed in pieces with backer board, darker parts above the eyes has one coat of Old Masters Gel and instructions for

$250.00 JC11

SOLD

This was for the Advanced Class in 2007. CT-3 Cowboy is approximately 18 1/2" high by 14" wide. This project is not glued down, it needs hand sanding, and the finish applied. Project includes unfinished roughed in pieces with backer board and instructions for

$300.00 JCCT32

SOLD

CT-4 Native American Female
This was for the Advanced class in 2008. It is approximately 16" high by 9 1/2" wide. This project is not glued down. It needs hand sanding, and the finish applied. Project includes unfinished roughed in pieces with backer board and instructions.

$300.00 JCCT45

CT-5 Chief
This was for the Advanced class in 2009. It is approximately 19" high and 14"wide. This project is not glued down. It needs hand sanding, and the finish applied. Project includes unfinished roughed in pieces with backer board and instructions.

$350.00 JCCT54

CT-1 Indian
This was for our Advanced class in 2005. It is approximately 16 3/4" by 10" wide. This project is not glued down, it needs hand sanding, and the finish applied. Project includes unfinished roughed in pieces with backer board and instructions.

$300.00 JCCT413

CT-2 Lion
This was for the Advanced class in 2006. It is approximately 14" high by 10" wide. This project is not glued down and needs to have the finish applied. Project includes unfinished roughed in pieces with backer board and instrutions.

$300.00 JCCT212

SOLD

This was for the Advanced Class in 2007. CT-3 Cowboy is approximately 18 1/2" high by 14" wide. This project is not glued down, it needs hand sanding, and the finish applied. Project includes unfinished roughed in pieces with backer board and instructions.

$300.00 JCCT31

SOLD

CT-5 Chief
This was for the Advanced class in 2009. It is approximately 19" high and 14"wide. This project is not glued down, it needs hand sanding, and the finish applied. Project includes unfinished roughed in pieces with backer board and instructions.

$350.00 JCCT58

CT-1 Native American
This was for our Advanced class in 2005. It is approximately 16 3/4" by 10" wide. This project is not glued down, it needs hand sanding, and the finish applied. Project includes unfinished roughed in pieces with backer board and instructions.

$300.00 JCCT12

CT-4 Native American Female
This was for the Advanced class in 2008. It is approximately 16" high by 9 1/2" wide. This project is not glued down, it needs hand sanding, and the finish applied. Project includes unfinished roughed in pieces with backer board and instructions.

$300.00 JCCT46

CT-5 Chief
This was for the Advanced class in 2009. It is approximately 19" high and 14"wide. This project is not glued down, it needs hand sanding, and the finish applied. Project includes unfinished roughed in pieces with backer board and instructions.

$400.00 JCCT57

CT-2 Lion
This was for the Advanced class in 2006. It is approximately 14" high by 10" wide. This project is not glued down, it needs hand sanding, and the finish applied. Project includes unfinished roughed in pieces with backer board and instrutions.

$300.00 JCCT214

SOLD
Sharpi Project
is approximately 10" high by 9" wide. This was from the 2006 Intermediate class. This project is not glued down, it needs hand sanding, and the finish applied. Project includes unfinished roughed in pieces with backer board. The darker pieces around head and part of mouth have one coat of Old Master Gel.

$200.00 JCS15

CT-1 Indian
This was for our Advanced class in 2005. It is approximately 16 3/4" by 10" wide. This project is not glued down, it needs hand sanding, and the finish applied. Project includes unfinished roughed in pieces with backer board and instructions.

$300.00 JCCT116

03/22/10